7
LINKR-M1_EN-04/22/16
BROWN/WHITE
(-) Pulsed Alarm Trigger Input
(Horn Honk/Light Flash)
YELLOW
(+) Ignition Input
Black 4-Pin Data Port Connector
Serial data installation:
Program host system for iDatalink
protocol and connect this to the system’s matching data port.
Hardwire installation:
Cut and remove connector from harness.
GRAY/BLACK
(-) Button Input
BLACK
System Ground (-) Input
BLACK/WHITE
Serial Data
PINK
Serial Data
BLUE
(-) Output 1
RED
Constant 12v (+) Input
ORANGE
(-) Output 3
BROWN
(+) Steady Alarm Trigger Input
(Alarm Siren)
GREEN
(-) Output 2
Panic/Override
Button
Ground
5 A
ORANGE
Starter Interrupt
Socket & Relay
(not included)
To Starter
To Ignition
Switch
WHITE
cut starter
wire
RED
Linkr-M1 Wiring Overview
TYPICAL INSTALLATION
WIRE LEGEND
Hard wire connection required
Supported via DATA port(s)
LINKR-M1 install guide EN A6.indd 7
5/24/2016 4:00:51 PM