![background image](http://html1.mh-extra.com/html/omega/isd-th/isd-th_user-manual_4178677039.webp)
4.4.4.2 Alarms
Figure 4.21 Management Menu: Alarms
This includes events or conditions. Once a condition is met the iServer will send an email
or/and an SNMP trap if either one or both are checked. Fields are described below.
Multiple alarm events can be checked and for each event an email and/or a trap
will be sent.
Temperature –
The options are
Low, High,
and
Low or High
.
If
Low
is selected the Low field must be given a value (lower than that value is an alarm
condition).
If
High
is selected the High field must be given a value (higher than that value is an
alarm condition).
If
Low or High
is selected the Low and High fields must be given values (outside the
band is an alarm condition).
Humidity –
The same as Temperature defined above.
Dew Point –
The same as Temperature defined above.
There is text box next to each event. The text content will be the body of the
email.
Power Reset –
This refers to the iServer being powered off and back on (power reset).
If the option is checked the iServer will automatically send one email or/and an SNMP
trap after rebooting, regardless of reminder interval.
Probe Disconnected –
If the probe attached to the iServer is disconnected that is
considered as an alarm condition.
http://192.168.1.200
Address
Alarms
Readings
Chart
Web Link
Setup
Overview
Network
Configuration
Management
Security
Recording
System
Diagnostics
Log Out
Save Changes
Reset
Temperature Low
Low 0.0
High 0.0
Low
0.0
0.0
Low
High
Low
0.0
0.0
Low
High
Low
0.0
0.0
Humidity
Dewpoint
Power Reset
Probe Disconnected
Recording Stopped
SD Card 10% Memory Left
Low Battery
Relay 1 Activated
Relay 2 Activated
Events
Email SNMP Trap
Alarms
Setup
Contact 1 Activated
Contact 2 Activated
33
There is text box next
to each event. The
text content will be the
body of the email.