manualshive.com logo in svg

Omega iSD-TH, Руководство пользователя, Страница: 13 / 80

Поделиться
Скачать
Omega iSD-TH Скачать руководство пользователя страница 13

7

2.3  Parts of the iServer Unit (continued)

BKLT

Button: Push and Hold to display Backlight on LCD when it is running on the 

back-up battery (backlight is always on while running on the ac adapter).

STBY

Button: 1) Stops the recording;  2) Press before ejecting Flash Card.

NOTE: display will show “Safe to Eject SD” after button has been pressed.

2.4  Disassembly Instruction

You may need to open the unit for one of the following reasons:  

•

To wire relay and I/O connector. (Refer to 

Figure 2.6

)

•

To connect or replace the battery.

Disconnect the power supply before proceeding.

•

Make sure the flash memory card is fully inserted (or removed), before removing the cover.

•

Remove probe from handle clip (if needed).

Remove cover, by removing 2 mounting screws on each side.

Figure 2.4  Opening the Unit

MOUNTING
SCREWS (2)

SD FLASH

CARD

COVER

RELAY

CONNECTOR

TRAY

I/O CONTACT

CONNECTOR

ETHERNET &

DC POWER

CONNECTORS

BATTERY

LOCATION

TEMP/

HUMIDITY

PROBE

Press STBY

before ejecting

Flash Card.

NOTE: display will

show “Safe to

Eject SD” after

button has been

pressed.

Содержание iSD-TH

















































































Отзывы:

Нет отзывов