Omega HHTQ35, Руководство пользователя

Страница: 6 / 24

HHTQ35 Digital Torque Gauges User’s Guide
5
3 MECHANICAL SETUP
Fig. 3.1
Proper axial loading of HHTQ35 torque gauge.
3.1 Proper alignment
Load must be applied axially with respect to the sensor, as shown in Figure 3.1. If attachments are used,
ensure that the sample is acted upon axially with respect to the instrument. Side loading or off-center
loading can damage the instrument, whether power is turned on or off.
3.2 Mounting to a plate
The indicator portion of the gauge can be mounted to a plate with four thumb screws fastened into the
appropriate holes in the rear half of the housing.
The torque sensor portion of the gauge (shown in Figure 3.1) can be mounted to a stand, as required for
the application. Flat surfaces are provided to prevent rotation within a fixture.
Refer to the
Dimensions section for detailed information.