Omega HHM596C, Руководство пользователя, Страница: 12 / 15

10
Frequency Measurements
1. Set the Function/Range switch to the Hz desired range.
2. Connect the red test lead to the " + " jack and the black test lead to the "COM"
jack.
3. Connect the test leads to the point of measurement and read the frequency
from the display.
Temperature Measurements
1. Set the Function/Range switch to the "°C" position.
2. Connect the temperature transition adaptor to the meter and make sure "
+ " and " - " polarity is right position.
3. Connect a type k thermocouple to the jack on the transition adaptor. Place
the probe or thermocouple tip on or in the material to be measured and take
the temperature reading directly from the display.
WARNING
Remove test leads being measured