Omega HH911T, Руководство пользователя

Страница: 16 / 37

Operating Instructions
3-4
4. To save the current
parameter value and cycle
to the next parameter,
press
(1.5s) ;
5. To save the current
parameter value and exit
the Setup Menu, press
;
6. To disregard changes
made to the current
parameter value and exit
the Setup Menu, press
.
If no key is pressed for ten (10) seconds, the instrument will save the current
configuration and exit the Setup Menu.
View Modes and Statistics
The instrument features multiple view modes including a variety of real-time statistics, all
available at the touch of a button. Figure 6 below describes each view mode.
Press to change view modes. For each mode, the active measurement or statistic result
is displayed on the second line of the display.
The T1-T2 view mode displays the current Channel 1 measurement minus the current
Channel 2 measurement. The display indicates T1-T2 at the left side of the display. If either
P
ARAMETER AVAILABLE VALUES
Thermocouple Type E, J, K, T
Temperature Units °C, °F, K
T1 Probe Offset ±0.1 ° increments
T2 Probe Offset 1 ±0.1 ° increments
Open Wire Detection ON, OFF
Resolution and
Rounding functions
rndG, Auto, CEIL, nOrL,
trnC
trnd ON, OFF
1
T2 Probe Offset available on model HH912T only.
Figure 5: Setup Menu Parameters and Values
V
IEW
M
ODE
D
ISPLAY
I
NDICATOR
D
ESCRIPTION
T1–T2 T1-T2
Current Channel 1 measurement – current
Channel 2 measurement
Minimum MIN
Minimum temperature recorded during
current session
Maximum MAX
Maximum temperature recorded during
current session
Average AVG
Average of all temperatures recorded during
current session
Range RNG Maximum - Minimum
Standard
Deviation
STDEV
Standard deviation of all temperatures
recorded during the current session 1 .
1 Standard Deviation is calculated using the population formula:
𝜎𝜎 = �
∑(𝑥𝑥−µ)
2
𝑁𝑁
Figure 6: View Modes and Statistics