![background image](http://html2.mh-extra.com/html/omega/hh506ra/hh506ra_manual_4118670003.webp)
(10) “TYPE” button (MAIN)
Press this button to change the type of thermocouple in
the main display (K/J/T/E/R/S/N). If the inputs of the main
and second displays are the same, then pressing this button
will change the thermocouple type for both displays.
(1
1) “TYPE” button (SECOND)
Press this button to change the type of thermocouple in
the second display (K/J/T/E/R/S/N). If the inputs of the
main and second display are the same, then pressing this
button will change the thermocouple type for both displays.
SETUP
MODE
The following functions can only be used in the setup
mode.
(2) “[Limits]” button (Hi/Lo limit setting)
and
Mini DIN output
Press the LIMITS button to enter the Hi/Lo Limit setup
function, the “LIMIT”, “HI”, and main display will blink
on the LCD, and the previous settings are displayed. Press
the number button printed on the overlay in white to
set Hi or Lo limit value. the resolution of Hi/Lo limit setup
is 1 count. The button “-” (same button as the ESC) can be
used to set negative values. Setting is from left to right digit.
Press the “ENTER” button to confirm each setting.
3) “[INVT]” button (Interval time setting)
T
o
setup the time interval for the log function, press the
[INVT] button to set the time. The indicator “INV” will be
blinking on the topright of the LCD and the previous settings
will be displayed. Press the number button printed on the
overlay in white to change the time interval. Setting is from
left to right of the following format (HH:MM:SS). Press the
overlay “ENTER” button to confirm. T
o
exit this function,
press the ESC button.
HH: Interval Hour (0~23)
MM: Interval Minute (0~59)
SS: Interval Second (0~59)
MAX: 23:59:59
MIN:00:00:01
(8) “[APO]” button (Auto power
off /time
setting,
min. 5 minutes)
Use this function to change the time for the Auto Power
Of
f (APO) function. Press the [APO] in setup mode, and the
indicator “APO” and the main display will blink on the
LCD, and the previous setting will be displayed. The
default time for APO is 5 minutes. Press the Number button
printed on the overlay in white to set the APO time.
Press the overlay “ENTER” button to confirm. T
o
exit this
function without changing the setting, press the ESC
button.
MAX: 19999 minutes
MIN: 0005 minutes
(9) “[OFS]” button (Thermocouple offset adjust)
When the main display input is T1 and socket thermo-
couple is connected, the instrument can adjust the of
fset of
the thermocouple or vice-versa for T2. In the setup mode,
press this button to enter the thermocouple Of
fset Setup
Function (OFS) and the indicator CAL
should be displayed on
the top righthand corner of the LCD while the main display
blinks. While the previous setting is displayed, press the
Number button printed on the overlay in white to change
or set the of
fset of the thermocouple. The resolution of
the setup is 0.1. Press the “-” button to set the negative
value. Press the overlay “ENTER” button to confirm.
MAX: 1999.9 C/F
(12) “[TIME]” button (System date and time setting)
T
o
set or change the system time, press the [TIME]
button in the setup mode. The time and date on the third
display panel should blink. Enter from left to right in the
following format: YY
:MM:DD and HH:MM:SS. Press
the Number button printed on the overlay in white word to
set the system date and time. Press the “ENTER” button
to confirm. Exit this function by pressing the ESC button.
PROCEDURE OF
CALIBRA
TION
1. Make ADJ pin short.
2. T2 input for a voltage of 70mV
will show a value
higher than 28000 2dgts at the third display and then
press “set[]” key in the next step.
3. T1 input for a temperature of 0C will show a value
5C at the main display
. Press “set[]” key
to complete the calibration.
4. T
ake of
f the short pin.
OPERA
T
OR MAINTENANCE
Battery Replacement
Power is supplied by a 9 volt “transistor” battery
.
(NEDA
1604, IEC 6F22). The “
” appears on the LCD
display when replacement is needed. T
o
replace the bat-
tery
, remove the two screws from the back of the meter and
lift of
f the battery cover
. Remove the battery from battery
contacts.
W
ARNING
T
o
avoid possible electrical shock, disconnect the
thermocouple connectors from the thermometer
before removing the cover
.
W
A
RRANTY
/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of
defects in materials and workmanship for a period of
13
months
from date of purchase. OMEGA
’s
W
ARRANTY
adds an
additional one (1) month grace period to the normal
one (1)
year product warranty
to cover ling
and shipping time.
This ensures that OMEGA
’s
customers receive maximum
coverage on each product.
If the unit malfunctions, it must be returned to the factory for
evaluation. OMEGA
’s
Customer Service Department will issue
an Authorized Return (AR) number immediately upon phone or
written request. Upon examination by OMEGA, if the unit is
found to be defective, it will be repaired or replaced at no
charge. OMEGA
’s
WARRANTY does not apply to defects
resulting from any action of the purchaser
,
including but not
limited to mishandling, improper interfacing, operation outside
of design limits, improper repair
,
or unauthorized modification.
This W
ARRANTY
is VOID if the unit shows evidence of having
been tampered with or shows evidence of having been
damaged as a result of excessive corrosion; or current, heat,
moisture or vibration; improper specification; misapplication;
misuse or other operating conditions outside of OMEGA
’s
control.
Components in which wear is not warranted, include but
are not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its
various products. However
,
OMEGA neither assumes
responsibility for any omissions or errors nor assumes
liability for any damages that result from the use of its
products in accordance with information provided by
OMEGA, either verbal or written. OMEGA warrants only
that the parts manufactured by it will be as specified and
free of defects. OMEGA MAKES NO OTHER
WARRANTIES OR REPRESENT
A
T
IONS
OF ANY KIND
TITLE, AND ALL IMPLIED W
ARRANTIES
INCLUDING ANY
W
ARRANTY OF
MERCHANT
ABILITY
AND
FITNESS
FOR
A
P
A
R
TICULAR PURPOSE
ARE
HEREBY
DISCLAIMED.
LIMIT
A
TION OF
LIABILITY
:
The
remedies
of
purchaser
set
forth herein are exclusive, and the total liability of
OMEGA with respect to this order
,
whether based on
contract, warranty
,
negligence, indemnification, strict
liability or otherwise, shall not exceed the purchase pric
e
of the component upon which liability is based. In no
event shall OMEGA be liable for consequential,
incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be
used, nor shall it be used: (1) as a “Basic Component” under 10
CFR 21 (NRC), used in or with any nuclear installation or activity;
or (2) in medical applications or used on humans. Should any
Product(s) be used in or with any nuclear installation or activity,
medical application, used on humans, or misused in any way
,
OMEGA assumes no responsibility as set forth in our basic
W
ARRANTY
/
D
ISCLAIMER language, and, additionally,
purchaser will indemnify OMEGA and hold OMEGA harmless
from any liability or damage whatsoever arising out of the use
of the Product(s) in such a manner.
RETURN REQUESTS
/
INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA
Customer Service Department. BEFORE RETURNING ANY
PRODUCT(S) TO OMEGA, PURCHASER MUST OBT
AIN
AN
AUTHORIZED RETURN (AR) NUMBER FROM OMEGA
’
S
CUSTOMER SER
VICE
DEP
A
R
TMENT
(IN ORDER TO A
VOI
D
PROCESSING DELA
YS).
The assigned AR number should then
be marked on the outside of the return package and on any
correspondence.
The purchaser is responsible for shipping charges, freight,
insurance and proper packaging to prevent breakage in transit.
FOR
W
ARRANTY
RETURNS,
please have the following
information available BEFORE
contacting OMEGA:
1. Purchase Order number under
which the product was
PURCHASED,
2. Model and serial number of th
e
product under warranty
, and
3. Repair instructions and/or
specific problems relative to
the product.
FOR
NON-W
ARRANT
Y
REP
AIRS,
consult OMEGA for
current repair charges. Have the
following information available
BEFORE contacting OMEGA:
1.
Purchase Order number to
cover the COST of the repair
,
2.
Model and serial number of
the product, and
3.
Repair instructions and/or
specific problems relative to
the product.
OMEGA
’s
policy is to make running changes, not model
changes, whenever an improvement is possible. This affords our
customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2004 OMEGA ENGINEERING, INC. All right
s
reserved. This document may not be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or
machine-readable form, in whole or in part, without the prior
written consent of OMEGA ENGINEERING, INC.
Where Do I Find Ever
ything I Need
for Pr
ocess Measurement
and Contr
ol?
OM
EGA…Of Course!
Shop online at omega.com
TEMPERA
TURE
䡺⻬
Thermocouple, R
T
D & Thermistor Pr
obes,
Connectors, Panels & Assemblies
䡺⻬
W
ir
e: Thermocouple, R
T
D & Thermisto
r
䡺⻬
Calibrators & Ice Point Refer
ences
䡺⻬
Recor
ders, Contr
ollers & Pr
ocess Monitors
䡺⻬
Infrar
ed Pyr
o
meters
PRESSURE, STRAIN AND FORCE
䡺⻬
T
ransducers & Strain Gages
䡺⻬
Load Cells & Pr
essur
e Gages
䡺⻬
Displacement T
ransducers
䡺⻬
Instr
umentation & Accessories
FLOW/LEVEL
䡺⻬
Rotameters, Gas Mass Flowmeters & Flow
Computers
䡺⻬
Air V
elocity Indicator
s
䡺⻬
T
u
rbine/Paddlewheel System
s
䡺⻬
T
o
talizers & Batch Contr
ollers
pH/CONDUCTIVITY
䡺⻬
p
H
Electr
odes, T
esters & Accessories
䡺⻬
Benchtop/Laboratory Meters
䡺⻬
Contr
ollers, Calibrators, Simulators & Pumps
䡺⻬
Industrial p
H
& Conductivity Equipment
DA
TA
ACQUISITION
䡺⻬
Data Acquisition & Engineering Softwar
e
䡺⻬
Communications-Based Acquisition Systems
䡺⻬
Plug-in Car
d
s for Apple, IBM & Compatible
s
䡺⻬
Datalogging Systems
䡺⻬
Recor
ders, Printers & Plotters
HEA
TER
S
䡺⻬
Heating Cable
䡺⻬
Cartridge & Strip Heaters
䡺⻬
Immersion & Band Heaters
䡺⻬
Flexible Heaters
䡺⻬
Laboratory Heaters
ENVIRONMENT
A
L
MONITORING AND CONTRO
L
䡺⻬
Metering & Contr
ol Instr
umentatio
n
䡺⻬
Refractometers
䡺⻬
Pumps & T
ubing
䡺⻬
Air
, Soil & W
ater Monitors
䡺⻬
Industrial W
ater & W
astewater T
reatment
䡺⻬
pH, Conductivity & Dissolved Oxygen
Instr
uments
WHA
T
SOEVER, EXPRESSED OR IMPLIED, EXCEPT THA
T
OF