![background image](http://html1.mh-extra.com/html/omega/hh376/hh376_user-manual_737698013.webp)
RTD THERMOMETER
10
SE376 will transfer the first data set to graph and tabular on the right side window once you finish
loading recorded data from the thermometer. You can click on at any data set to show it’s graph
and tabular on the right side window.
You can choose a rectangle area on the graph to zoom in for detail.
The vertical dash line in the graph will match the highlight row in the tabular. When clicking on
another row in the tabular, the vertical dash line will move to the corresponding position to
match the time.
(9) Frequently Asked Question:
Q:
I have connected thermometer to computer serial port and turned thermometer on, but it still
shows "NO CONNECTION" ?
A:
This could be caused if all serial ports are occupied by other applications. Close all
applications, restart your computer, and run SE376 again.
Q:
In TABULAR window, I saved a file. Can I use EXCEL to open this file?
A:
If the decimal separator is comma (,) in your area, you cannot use CSV file because CSV
file uses comma to separate data. This will cause confusion (for example 23,6,C,24.6,C).
However, you can use TXT files instead. It uses tab to separate the data.
(For example: 23.6 C 24.6 C) can be accepted in EXCEL.
Q:
How to uninstall SE376?
A:
Uninstall SE376 by launching the Add/Remove Programs applet out of the Control Panel,
highlighting the SE376, and clicking on the Add/Remove... button, this will remove the SE376
folder and files from your computer.