![background image](http://html1.mh-extra.com/html/omega/excalibur-al-1810-edp/excalibur-al-1810-edp_operation-manual_3948244018.webp)
Alarm Valet Mode:
This allows you to turn off all of the “alarm” operations of
the security system while retaining the remote convenience features such as keyless
entry, Panic, and the Auxiliary Outputs. Remote starting is still operable, and has
its own valet mode (below). The system may only be placed into Alarm Valet Mode
when it’s disarmed; if armed, an Emergency Override must be performed before
placing into Alarm Valet Mode. Once the system is in Alarm Valet Mode, it cannot
become armed from the transmitter, Last Door Arming, or Automatic Rearming.
Alarm Valet Mode and Emergency Override are two similar, but different
procedures, although both operations use the Valet Switch, . Emergency Override
disarms an armed and activated system, and requires the ignition key. Alarm Valet
Mode turns off the alarm operations of the disarmed system, but without the need
of the ignition key.
Alarm Valet Mode is designed for situations in which it is not convenient for
the security portion of the system to be operational, such as during extended
stopovers for vehicle servicing, maintenance, valet parking, washing, etc.
To Enter Alarm Valet Mode:
With the system disarmed, and without pressing
the brake pedal, press and hold the Valet Switch for 2 seconds.
• The siren will chirp twice, the parking lights will flash twice and the Status
Light will illuminate solid red, then a series of green flashes, then return to solid
red. The green flashes, numbering from 1 to 6 times, is a remote starting diag-
nostic code (see page 21).
• To indicate that the system is in Alarm Valet Mode, the Status Indicator Light
remains solid red whenever the system is in Alarm Valet Mode.
• To remind the user that the system is in Alarm Valet Mode, the siren will
chirp once every time the vehicle’s ignition is turned off.
Page - 18
• The siren will chirp twice, the parking lights will flash twice and the Status
Light will illuminate solid green to confirm that the system is in Starting Valet
Mode.
• There is no audible reminder that the system is in Starting Valet mode.
To Enter both Modes (Full Valet Mode):
With the system disarmed, press
and hold the Valet Switch for 4-6 seconds with the brake pedal in both conditions.
For example, start pressing the Valet Switch with the brake pedal unpressed; as
Starting Valet Mode:
This feature is similar to Alarm Valet Mode, but its
purpose is turn off the remote starting operations of the system. The system may
be placed into Starting Valet Mode and Alarm Valet Mode independently, or into
both modes at the same time. Please note that the only difference in obtaining either
mode is whether or not the brake pedal is being pressed.
To Enter Starting Valet Mode
With the system disarmed, and depressing the
brake pedal, press and hold the Valet Switch for 2 seconds.
If the Unauthorized Transmitter Alert feature is on, programming a
controller or transmitter to the system will activate the Unauthorized
Transmitter Alert warning and the extended Status Light visual
display; for the next 48 hours the siren will sound a brief series of
chirps every time the vehicle’s ignition key is turned on. The
following special procedure programs the controllers/transmitters
and also turns the Unauthorized Transmitter Alert feature on.
Step 3
Press the “arm/lock” button on each remaining controller or transmitter.
The system will chirp the siren once to confirm that each was learned.
The controller or transmitter’s other three button's functions will
automatically be assigned when the “arm/lock” button is learned. If a code
is not received within a 10 second period, the learning process will
automatically terminate, as indicated by another siren burst.
Step 2
Within 5 seconds of turning on the ignition, press the Valet Switch 5 times.
The siren will briefly sound, confirming that for the next 10 seconds the
system is ready to learn a controller/transmitter code. To enter a code,
simply press and release the “arm/lock” button (the button which is
designed to arm the system). When the first controller/transmitter code is
learned all existing stored codes will be erased.
Page - 27
Special Programming procedure to turn On the UTA feature:
Using this
method to program controllers or transmitters, and to turn on or turn off the
Unauthorized Transmitter Alert feature.
Follow the same steps as the Standard Programming, but on any controller/
transmitter being programmed instead of pressing the “arm/lock” button, press the
“arm/lock” and the “disarm/unlock” buttons together. This action turns on the
Unauthorized Transmitter Alert feature and at the same time programs the controller/
transmitter to operate the system.
Once the Unauthorized Transmitter Alert feature is turned on, the warning will
sound for 48 hours after any controller or transmitter programming, including the
programming session which was used to turn it on.