Omega DRST-AC Скачать руководство пользователя страница 5

Страница: 5 / 28

Warning

WARNING

This device is designed for connection to hazardous electric voltages. Ignoring this

warning can result in severe personal injury or mechanical damage.

To avoid the risk of electric shock and fire, the safety instructions of this guide must be

observed and the guidelines followed. The specifications must not be exceeded, and

the device must only be applied as described in the following.

Prior to the commissioning of the device, this installation guide must be examined

carefully.

Only qualified personnel (technicians) should install this device. If the equipment is

used in a manner not specified by the manufacturer, the protection provided by the

equipment may be impaired.

GENERAL

WARNING

Until the device is fixed, do not connect hazardous voltages to the device. The

following operations should only be carried out on a disconnected device and under

ESD safe conditions:

General mounting, connection and disconnection of wires.

Troubleshooting the device.

Repair of the device and replacement of circuit breakers must be done by

Omega A/S only.

HAZARD OUS

VOLTAGE

Triangle with an exclamation mark: Read the manual before installation

and commissioning of the device in order to avoid incidents that could lead

to personal injury or mechanical damage.

The CE mark proves the compliance of the device with the essential

requirements of the directives.

The double insulation symbol shows that the device is protected by double

or reinforced insulation.

Do not open the front plate of the device as this will cause damage to the connector for the

display / programming front DRSL-DISPLAY.

This device contains no DIP-switches or jumpers.

DRST Series must be mounted on a DIN rail according to DIN EN 60715.

WARNING

CAUTION

Section 1.2 - Symbol Identification

Содержание DRST-AC





























Результаты поиска

Содержание DRST-AC

Отзывы:

Похожие инструкции для DRST-AC

Бренды по названию

Популярные бренды

Omega DRST-AC, Руководство пользователя

Результаты поиска

Содержание DRST-AC

Отзывы:

Похожие инструкции для DRST-AC

Бренды по названию

Популярные бренды