Omega DPG8001, Руководство пользователя, Страница: 9 / 20

9
displayed in Measurement mode.
In Measurement mode, apply desired pressure
press
U
ZERO
➟
, to enable the tare function. The
display will quickly flash “TARE”, then the
“TARE” icon will be displayed and the pressure
reading will blink. The unit should now read
0. Press
U
ZERO
➟
the TARE key ICON again to
disable the function. The display will quickly
flash “T OFF”, then the “TARE” icon will disap-
pear and the pressure reading will no longer be
blinking. The unit will now return to measure-
ment mode.
Programming:
To enter menu mode
1. Press
U
MENU
➟
and release to proceed
to programming mode.
2. Press
U
C
,
U D
➟
, to scroll through pro-
grammable menu options.
3. When desired option is reached press
U
u
|
|
➟
to access that parameter.
4. If at any time you choose to EXIT the
menu mode (or sub-menu mode) hold
U
MENU
➟
. Your work will not be saved.
Programmable Parameters:
Units of Measure:
1. In Menu mode, press
U
C
,
U D
➟
, to
scroll to “UNITS”, press
U
u
|
| ➟
.
2. Choose engineering units by scrolling
U
C
,
U D
➟
, until desired unit is dis-
played, “PSI, BAR, kg/cm, kPa, mPa,
FtH
2
O, InHg, cmHG, mmHg, customer
defined units (CUSTU)”.
3. Press
U
u
|
| ➟
to select units and return
to Measurement Mode.
Note: Custom units programming, see page 8.
Engineering units available will vary
based on full scale pressure range.
Custom Units of Measure
Allows a user to define a custom unit of mea-