11
ered ON once the Power key
U
u
|
|
is pressed.
1. When in menu mode press
U
C
,
U
D
➟
to scroll until “TIMER” is displayed.
2. Press
U
u
|
|
➟
.
3. Press
U
C
,
U
D
➟
to scroll through
values. “NONE” designates that the
gauge will remain ON until the power
key
U
u
|
|
is pressed a second time. Any
other value (1 min [default] / 5 min / 20
min), other than “NONE”, will designate
the duration of time this function will be
in effect.
4. Press
U
u
|
|
➟
to select desired value;
timer icon will be shown on the display
and the unit will display “DONE” then
return to Measurement Mode.
Feature:
Timer icon will flash 10 seconds
prior to gauge shut down. Timer resets
when any key is pressed.
Light:
this is initiated upon powering the unit or since
the values were cleared.
1. When in menu mode press
U
C
,
U
D
➟
to scroll to ‘Max’ (maximum display);
this is indicated in small font to the left
of the display’s unit of measure.
2. To clear
both
Min and Max values, press
and hold
U
ZERO
➟
.
3. Release of this key will leave you in
Menu mode. Use
U
C
,
U
D
➟
to
continue scrolling through the menu
options, OR hold,
U
MENU
➟
to return
to measurement mode.
Note:
Clearing Minimum / Maximum
values will reflect a blank display except
for the associated Min. / Max. icon and
battery indicator.
Note:
The following actions will also
clear min/max values. Power off, zero
gauge function, tare function, field
calibration function, units programming,
update rate, or reset.
Timer:
Controls how long the gauge will remain pow-