Upon Activating Panic:
✓
The electronic siren will sound.
✓
The vehicle’s exterior parking lights will flash.
✓
The vehicle’s doors will lock or unlock, depending on button used.
• The Panic feature is designed for situations in which the user feels threatened
and/or a need to attract attention.
• Panic can be activated anytime, whether the vehicle’s ignition is turned on or
off, and has a 30 second duration (60 seconds is optional) unless it is deacti-
vated using the remote control.
• At the end of the Panic cycle the system will reset, enter the armed state, and
lock the doors.
• If the Echo transceiver is used to activate the Panic feature, it will also chirp
continuously as long as Panic is activated, although its chirps can be silenced
without stopping Panic by pressing the “
II
”, “
III
”, or Progamming button.
To Deactivate Panic:
Press & Release either button
“Enhanced Panic” allows you to activate Remote Panic from either the “Arm/
Lock” button or “Disarm/Unlock” button; the former locks the doors and the
latter unlocks the doors when Remote Panic is activated.
Deactivating Remote Panic from the “Arm/Lock” button results in the system
being in the Armed state with locked doors. If the “Disarm/Unlock” button is
used to deactivate Remote Panic the system will be in the Disarmed state, with
unlocked doors.
Page 15
AUXILIARY OUTPUTS
The previous sections have described the basic everyday operations of your
Crime Guard system. The transmitter or Echo transceiver is also capable of
operating several other optional functions which are explained in this section.
Two auxiliary outputs are available for use (the primary output Arms and
Disarms the system). One output, the Auxiliary #2 output, is also capable of
Disarming the system; thus it is ideally suited for remote trunk release. Operat-
ing Auxiliary #2 will also unlock the doors and Disarm the system, should it be
armed. If desired, the unlocking of the doors and disarming of the system may
be programmed to not operate. The other output, Auxiliary #3 output cannot
affect the armed or disarmed status of the system, nor unlock the doors as part of
its operation.
Page 34
Feature #14
Ignition Activated Vehicle Recovery
(Factory Default Setting Off)
The Vehicle Recovery feature activates the system into an alarm condition
automatically in the event that you are forced from your car. “Ignition Activated”
Vehicle Recovery is one three methods of activating this feature, which is
explained on page 25.
Programming Ignition Activated Vehicle Recovery:
Follow Steps 1 to 4 on page 27; at Step 4 the Valet Switch will be pressed and
released fourteen times. The system’s response will be fourteen siren chirps, and
the Status Light flashing fourteen times, pausing, then repeating. Within 10
seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to
turn on Ignition Activated Vehicle Recovery (the siren will chirp once) or the
"Disarm/Unlock" button to turn this feature off (the siren will chirp twice).
Feature #16
Remote Activated Vehicle Recovery
(Factory Default Setting Off)
This form of the Vehicle Recovery feature gives you the option of activating
Feature #15
Door Activated Vehicle Recovery
(Factory Default Setting Off)
The Vehicle Recovery feature activates the system into an alarm condition
automatically in the event that you are forced from your car. “Door Activated”
Vehicle Recovery is one three methods of activating this feature, which is
explained on page 25.
Programming Door Activated Vehicle Recovery:
Follow Steps 1 to 4 on page 27; at Step 4 the Valet Switch will be pressed and
released fifteen times. The system’s response will be fifteen siren
chirps, and
the Status Light flashing fifteen times, pausing, then repeating. Within 10
seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to
turn on the Door Activated Vehicle Recovery feature (the siren will chirp once)
or the "Disarm/Unlock" button to turn this feature off (the siren will chirp twice).
Programming Doors Lock With Automatic Rearming:
Follow Steps 1 to 4 on page 27; at Step 4 the Valet Switch will be pressed and
released thirteen times. The system’s response will be thirteen siren chirps, and
the Status Light flashing thirteen times, pausing, then repeating. Within 10
seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to
turn this feature on (the siren will chirp once) or the "Disarm/Unlock" button to
turn this feature off (the siren will chirp twice).