29
DATA FORMAT SUBMENU:
Preformatted data can be sent automatically or upon request from the unit. Use
the Data Format Submenus to determine what data will be sent in this
preformatted data string. Refer to the iSeries Communications Manual for more
information about the data format. At least one of the following suboptions must
be enabled and hence output data to the Serial Bus.
This menu is applicable for Continuous Mode of RS-232 communication.
Press
d
37)
Display advances to
STAT
Alarm Status Submenu.
ALARM STATUS SUBMENU:
Includes Alarm Status bytes in the data string.
Press
d
38)
Display flashes previous selection for “Status” (alarm status).
Press
b
39)
Scroll through the available selections: NO, YES.
Press
d
40)
Display shows
STRD
stored message momentarily and then
advances to
HUMD
only, if it was changed, otherwise press
a
to
advance to
HUMD
Humidity Submenu.
HUMIDITY READING SUBMENU:
Includes Humidity Reading in the data string.
Press
d
41)
Display flashes
HUMD
.
Press
b
42)
Scroll through the available selections: NO, YES.
Press
d
43)
Display shows
STRD
stored message momentarily and then
advances to
TEMP
only, if it was changed, otherwise press
a
to
advance to
TEMP
Temperature Submenu.
TEMPERATURE READING SUBMENU:
Includes Temperature Reading in the data string.
Press
d
44)
Display flashes
TEMP
.
Press
b
45)
Scroll through the available selections: NO, YES.
Press
d
46)
Display shows
STRD
stored message momentarily and then
advances to
DEU
only, it was changed, otherwise press
a
to
advance to
DEU
Dewpoint Submenu.
DEWPOINT READING SUBMENU:
Includes Dewpoint Reading in the data string.
Press
d
47)
Display flashes
DEU
.
Press
b
48)
Scroll through the available selections: NO, YES.
Press
d
49)
Display shows
STRD
stored message momentarily and then
advances to
UNIT
only, if it was changed, otherwise press
a
to
advance to
UNIT
Temperature Unit Submenu.