16
3.2.4 Reading Configuration
It
is required that you put the unit in the Standby Mode for any
configuration change other than Set Points & Alarms.
Figure 3.3 Flow Chart for Reading Configuration Menu
ENTER READING CONFIGURATION MENU:
Press
a
1)
Press
a
, if necessary, until
CNFG
prompt appears.
Press
d
2)
Display advances to
RDG
Reading Configuration Menu.
Press
d
3)
Display advances to
SNSR
Sensor.
SENSOR SUBMENU:
Press
d
4)
Sensor selection for Autotune, Loop (Reading Offset Adjust), or
Ramp and Soak
°F.°C
is for temperature and
DRRh
is for
Humidity.
TEMPERATURE UNIT SUBMENU:
Press
d
5)
Display flashes previous Temperature Unit selection.
Press
b
6)
Scroll though the available selections to the Temperature Unit
of your choice:
°F
or
°C
.
Press
d
7)
Display shows
STRD
stored message momentarily and then
advances to
FLTR
Filter Constant.
FILTER CONSTANT SUBMENU:
Press
d
8)
Display flashes previous selection for Filter Constant.
Press
b
9)
Scroll though the available selections:
0001
,
0002
,
0004
,
0008
,
0016
,
0032
,
0064
,
0128
Press
d
10)
Display shows
STRD
stored message momentarily only, if
change was made, otherwise press
a
to advance to the next
menu.
The Filter Constant Submenu allows the user to specify the
number of readings stored in the Digital Averaging Filter.