![background image](http://html1.mh-extra.com/html/omega/cnith-i16d/cnith-i16d_user-manual_736776024.webp)
20
ALARM ENABLE/DISABLE AT POWER ON:
Press
d
13)
Display flashes previous selection. Press
b
to
ENBL
enable
or
DSBL
disable.
Press
d
14)
Display shows
STRD
stored message. momentarily (only if it
was changed) and then advances to
ALR.L
.
If Alarm at Power On is enabled, the alarm will be active when an alarm
condition occurs.
If Alarm at Power On is disabled, the alarm will not be active (even if an
alarm condition exists)
unless
the process value moves into a non-alarm
condition and back into an alarm condition.
ALARM 1 LOW VALUE SUBMENU:
Press
d
15)
Display flashes 1
st
digit of previous value. Use
b
and
c
to
enter new value.
Press
b
&
c
16)
Use
b
and
c
to enter Alarm 1 Low Value.
Press
d
17)
Display shows
STRD
storage message momentarily (only if
it was changed) and then advances to
ALR.H
.
ALARM 1 HI VALUE SUBMENU:
Press
d
18)
Display flashes 1
st
digit of previous value. Use
b
and
c
to
enter new value.
Press
b
&
c
19)
Use
b
and
c
to enter Alarm1 Hi Value.
Press
d
20)
Display shows
STRD
stored message momentarily (only if it
was changed) and then advances to the next menu.