Omega CNi16A, Руководство пользователя

Страница: 8 / 73

1.3 Before You Begin
Inspecting Your Shipment:
Remove the packing slip and verify that you have received everything
listed. Inspect the container and equipment for signs of damage as soon
as you receive the shipment. Note any evidence of rough handling in
transit. Immediately report any damage to the shipping agent. The carrier
will not honor damage claims unless all shipping material is saved for
inspection. After examining and removing the contents, save the packing
material and carton in the event reshipment is necessary.
Customer Service:
If you need assistance, please call the nearest Customer Service
Department, listed in this manual.
Manuals, Software:
The latest Operation and Communication Manual as well as free
configuration software
are available at the website listed on the cover
page of this manual
.
For first-time users: Refer to the QuickStart Manual for basic operation
and set-up instructions.
If you have the Serial Communications Option you can easily configure
the controller on your computer.
To Disable Outputs:
To ensure that menu changes are properly stored, Standby Mode should
be used during setup of the instrument. During Standby Mode, the
instrument remains in a ready condition, but all outputs are disabled.
Standby Mode is useful when maintenence of the system is necessary.
When the controller is in "RUN" Mode,
push
d
twice
to disable all
outputs and alarms. It is now in "STANDBY" Mode.
Push
d
once
more
to resume "RUN" Mode.
PUSH
d
TWICE
to disable the system during an
EMERGENCY
.
To Reset the Meter:
When the controller is in the "MENU" Mode,
push
c
once
to direct
controller one step backward of the top menu item.
Push
c
twice
to reset controller, prior to resuming "Run" Mode except
after "Set Points" and "Alarms", that will go to the "Run" Mode without
resetting the controller.
4