![background image](http://html1.mh-extra.com/html/omega/cni16-al/cni16-al_user-manual_736770041.webp)
37
ECHO SUBMENU:
When valid commands are sent to the instrument, this determines whether the
command will be echoed to the Serial Bus. Use of echo is recommended in most
situations, especially to help verify that data was received and recognized by the
monitor.
Press
d
25)
Display flashes previous selection for “Echo”.
Press
b
26)
Scroll through the available selections: NO, YES.
Press
d
27)
Display flashes
STRD
stored message momentarily and then
advances to
STND
only, if it was changed, otherwise press
a
to
advance to
STND
Communication Standard Submenu.
COMMUNICATION INTERFACE STANDARD SUBMENU:
Determines whether device should be connected to an RS-232C serial port (as
is commonly used on IBM PC-compatible computers) or via an RS-485 bus
connected through appropriate RS-232/485 converter. When used in RS-485
Mode, the device must be accessed with an appropriate Address Value as
selected in the Address Submenu described later.
Press
d
28)
Display flashes previous selection for “Standard”.
Press
b
29)
Scroll through the available selections: 232C, 485.
Press
d
30)
Display shows
STRD
stored message momentarily and then
advances to
MODE
only, if it was changed, otherwise press
a
to
advance to
MODE
Data Flow Mode Submenu.
DATA FLOW MODE SUBMENU:
Determines whether the instrument will wait for commands and data requests
from the Serial Bus or whether the instrument will send data automatically and
continuously to the Serial Bus. Devices configured for the RS-485
Communications Standard operate properly only under Command Mode.
Press
d
31)
Display flashes previous selection for “Mode”.
Press
b
32)
Scroll through the available selections:
CMD_
_
“Command”,
CONT
“Continuous”.
Press
d
33)
Display shows
STRD
stored message momentarily and then
advances to
SEPR
only, if it was changed, otherwise press
a
to
advance to
SEPR
Data Separation Submenu.
Содержание CNi16-AL
Страница 17: ...3 2 Menu Configuration Figure 3 1 Flow Chart for ID and Set Points Menu 13...
Страница 21: ...3 2 4 Input Type Menu Figure 3 3 Flow Chart for Input Type Menu 17...
Страница 54: ...NOTES 49...
Страница 55: ...NOTES 50...