Omega CN32Pt, Руководство пользователя

Страница: 4 / 20

Platinum Load & Save File Format
1 Introduction
1.1 Purpose
The following document defines the file format used by the Platinum series Load and Save
commands.
The Save command is intended to capture the configuration of a Platinum series controller and save
it on removable media (ie: USB Stick memory).
The Load command is intended to read a configuration image from an external device (ie: USB
memory stick) and store it on a Platinum device.
The file format used is an ASCII text file, with tab delimiters between each field. These files may be
reviewed or modified using a simple text editor or application programs such as Microsoft Excel that
support reading tab delimited files.
1.2 Definition of Terms and Acronyms
I2C 2 wire serial interface
Base Device Device connected to slave device
Smart Input Device supporting 1 or more Input sensors
Smart Output Device supporting 1 or more Output Elements
Sensor Element One of the physical sensing elements on a Smart Output
AC Alternating Current
DC Direct Current
CS Chip Select
ADC Analog to Digital Converter
DAC Digital to Analog Converter
RS485 Electrical signals used for serial communications
RS232 Electrical signals used for serial communications
CSV Comma Separated Values
COTS Commercially-Off-The-Shelf
ESD Electo Static Discharge
FW Firmware
HW Hardware
I/O Input/Output
LED Light Emitting Diode
Hexadecimal Values expressed using base 16 (2 4 )
Revision 0.1
Page 2 of 15