Omega CN16Pt, Руководство пользователя

Страница: 52 / 61

PLATINUM
TM
Series User’s Guide
52 Reference Section: Operating Mode (oPER)
5.7.8.2 Ramp / Soak Program Linking
LINK parameter
N Where N is the number of
the current program
Allows continuous cycling of a single program
0 Reload the S.PRG program Allows continuous process cycling using
multiple linked programs
1..99 Load the specified program Allows linking to a specified program
100 Reload the current program Allows cycling of the last program in a linked
chain of programs
6. Reference Section: Operating Mode (oPER)
Operating Mode is used to activate the unit’s monitoring and controlling functions. It also allows
shortcut access to the Setpoint parameters while still running. Use Operating Mode to set the following
parameters and perform the following functions:
6.1 Normal Run Mode (oPER > RUN) ................................................................................................ 52
6.2 Change Setpoint 1 (oPER > SP1) .................................................................................................. 53
6.3 Change Setpoint 2 (oPER > SP2) .................................................................................................. 53
6.4 Manual Mode (oPER > MANL) .................................................................................................... 53
6.5 Pause Mode (oPER > PAUS) ........................................................................................................ 53
6.6 Stop Process (oPER > StoP) ......................................................................................................... 54
6.7 Clear Latched Alarms (oPER > L.RSt) ........................................................................................... 54
6.8 Display Valley Reading (oPER > VALy) ......................................................................................... 54
6.9 Display Peak Reading (oPER > PEAk) ........................................................................................... 54
6.10 Standby Mode (oPER > Stby) ...................................................................................................... 54
6.1 Normal Run Mode (oPER > RUN)
Select Normal Run Mode ( RUN ). The ENTER button starts the unit operating according to the
current input, output, and communications settings. Run Mode will automatically be entered
and activated at unit power-on if the Power on Confirmation (
4.5.1 Power On Confirmation
(INIt > SFty > PwoN) ) parameter is set to dSbL . The process value is displayed in the main
display, and if the unit uses dual displays, the current Setpoint value is displayed in the
secondary display. With the unit remaining active, the
oPER menu selections can be navigated
to using the LEFT and RIGHT buttons.
Omega Engineering | www.omega.com