![background image](http://html1.mh-extra.com/html/omega/cl310/cl310_user-manual_737627040.webp)
*RST
Resets the state of the instrument to the power-up state. This
command holds off execution of subsequent commands until it
is complete.
*SRE
Loads a byte into the Service Request Enable register.
*SRE?
Returns the byte from the Service Request Enable register.
*STB?
Returns the status byte.
*WAI
Prevents further remote commands from being executed until
all previous remote commands have been executed.
Table 6: Calibrator Commands
Command
Description
CAL_START
Puts the calibrator in calibration mode
CJC_STATE
Turns CJC on or off.
CJC_STATE?
Returns the state of the CJC
CPRT_COEFA
Sets the custom RTD coefficient A
CPRT_COEFA?
Returns the custom RTD coefficient A
CPRT_COEFB
Sets the custom RTD coefficient B
CPRT_COEFB?
Returns the custom RTD coefficient B
CPRT_COEFC
Sets the custom RTD coefficient C
CPRT_COEFC?
Returns the custom RTD coefficient C
CPRT_MIN_T
Sets the custom RTD minimum temperature
CPRT_MIN_T?
Returns the custom RTD minimum temperature
CPRT_MAX_T
Sets the custom RTD maximum temperature
CPRT_MAX_T?
Returns the custom RTD maximum temperature
CPRT_R0
Sets the custom RTD R0 resistance
CPRT_R0?
Returns the custom RTD R0 resistance
FAULT?
Returns the error code of an error that has occurred
FREQ_LEVEL
Sets the frequency and pulse amplitude
FREQ_LEVEL?
Returns the frequency and pulse amplitude
FREQ_TYPE
Set the frequency output to continuous (frequency) or
pulse.
FREQ_TYPE?
Returns frequency output type, continuous or pulse
FREQ_UNIT
Sets the unit for frequency and pulse
FREQ_UNIT?
Returns the unit for frequency and pulse
FUNC?
Returns the current mode of the upper and lower dis-
play
GET_CLOCK
Returns the calibrator date and time setting
GET_SN
Returns the calibrator serial number
36