FAULT PHENOMENON
CAUSE ANALYSIS
CAUSE ANALYSIS
UNABLE TO START
SWITCH, PRODUCT
FAILS TO WORK.
1. POWER PLUG NOT PLUGGED IN
2. HEAD COVER INSTALLED
INCORRECTLY
1. INSERT THE POWER PLUG AGAIN;
2. INSTALL HEADCOVER IN PLACE
ELECTRIC MOTOR
SMELLS BAD FIRST
FEW TIMES OF USE.
IT IS NORMAL.
PLEASE CALL CUSTOMER SERVICE IF
THE PRODUCT CONTINUES TO HAVE
AN ODOR
STOPS WHILE
USING.
1. LOW POWER VOLTAGE IS OFF
2. EXCESSIVE INGREDIENTS
3. PUSHING PUSHER WITH EXCESSIVE
FORCE
4. MOTOR OVERHEAT CONTROL
PROTECTION
1. CHECK IF POWER IS OFF
2. DISCONNECT POWER, TAKE OUT
THE SURPLUS INGREDIENTS.
3. PUSH THE ROD GENTLY.
4. RESTART IT AFTER STOPPING
20-30 MINUTES.
TOO MUCH
PULP IN THE JUICE
1. JUICE EXTRACTION SCREEN IS
DAMAGED.
2. TOO MUCH PULP IN THE CENTRAL
RING.
1. REPLACE THE SCREEN.
2. CLEAN THE CENTRAL RING.
ABNORMAL
VIBRATION OR
LOUD NOISE.
1. IMPROPER INSTALLATION OF JUICE
EXTRACTION SCREEN OR
IN BALANCED INSTALLATION.
2. UNSTABLE PLACEMENT OF
PRODUCT OR CAME OFF OF
FOOT PAD.
3. EXCESSIVE INGREDIENTS
1. INSTALL JUICE EXTRACTION
SCREEN IN PROPER PLACE.
2. PLACE PRODUCT STABLY OR
INSTALL THE FOOT PAD IN
PROPER PLACE.
3. DISCONNECT POWER AND TAKE
OUT EXCESSIVE INGREDIENTS.
LOW QUANTITY OF
JUICE
1. TO MUCH PULP IN FILTER BASKET
2. PUSHING PUSHER WITH EXCESSIVE
FORCE
1. CLEAN CENTRAL RING.
2. PRESS THE PUSH ROD WITH LESS
FORCE.
FILTER BASKET
STUCK
PRODUCE OR PULP IS STUCK. THIS
MAY HAPPEN WITH CELERY STRINGS.
DISCONNECT POWER, REMOVE FOOD.
11
TROUBLESHOOTING
