background image

Welcome to the convenience and protection offered by your

Executive Model ONE UltiMate vehicle security system.  UltiMate
is designed and manufactured by Omega Research and Develop-
ment, a world leader in vehicle convenience and security since
1975.  Your system offers easy, carefree operation, and the
modular design allows its many impressive features to be custom-
ized to suit your needs.  This sophisticated, state-of-the-art product
deters theft of your vehicle, and its contents.  Executive Model ONE
systems are designed for professional installation, and are avail-
able only through new car retail outlets and selected mobile
electronics specialist dealers.

Please note that this guide is written to reflect:

-

That a power doorlock interface is installed with your system
(the UltiMate also operates your power doorlocks).  The type
of interface may vary from one vehicle to the other, and in some
cases may involve optional components.

-

That the vehicle's existing horn is used for the system’s audible
output; an optional electronic siren is also available.

-

That the Programmable Features are in the default settings;
the operations of these features are also explained.

Your UltiMate system has three principal user components:  the

red LED Status Light, the Valet Switch, and the Remote Transmit-
ter.

The Red LED Status Light: Informs you at a glance which of the

different conditions the security system is in, and also serves as a
visual deterrent to break-ins and theft.

The

 

Valet Switch: Is used to access Valet Mode, which allows

the operator to suspend some of the security system's normal
functions for as long as desired.  The Valet Switch may also be
used, instead of the remote transmitter, to override an armed and
activated system.  The Valet Switch is also used when programming
remote transmitters and system features.

Introduction

Page - 3

press the PANIC button for level 4 (the loudest).  This feature is only
available for use when the previous feature is programmed for the
"Pulsed Horn" setting.

#23  Total Closure Lock Output: Default OFF.  If the vehicle is
has an existing total closure feature, this programmable feature al-
lows the installer the option of interfacing the UltiMate to operate it.
Typically, this option would close all windows and the sunroof, in
addition to locking the doors, when arming the system.  Consult with
the installer on this option, as the vehicle must already be properly
equipped to utilize this feature.

#24  Alarm Functions Bypass: Default OFF.  This feature con-
verts the system into a Remote Keyless Entry System only by elimi-
nating all antitheft alarm-oriented operations and features.  When
this feature is programmed on, the UltiMate has remote keyless en-
try operation only.

#25  Ignition-Activated Anti-Carjacking Protection: Default OFF.
Your UltiMate offers three separate forms of anti-carjacking protec-
tion.  When this feature is utilized, you must press the valet

 

switch

once within 60 seconds after turning the ignition switch on and start-
ing the vehicle.

If this is not done within this period, the system will begin chirping

the horn 53 seconds after the ignition was turned on.  These chirps
are to warn you that the anti-carjacking protection is about to en-
gage; pressing the valet switch before the 60 seconds expires will
stop the anti-carjacking protection feature. Once starting, the chirp-
ing will last for 7 seconds; unless the anti-carjacking feature is can-
celled as described, once 60 seconds has passed from the time the
ignition was turned on, the horn will start sounding fully, and the
parking lights will begin flashing.  Thirty seconds after this occurs, or
if the ignition is turned off, the starter interrupt circuit will also acti-
vate.  Once the Anti-Carjacking is fully engaged, i.e. sounding the
horn and flashing the lights, the only way to disengage it is to turn
the ignition off, then on again, and then press the valet switch within
5 seconds.

#26  Door-Activated Anti-Carjacking Protection: Default OFF.

Page - 26

Содержание UltiMate















Отзывы: