Omega Engineering OMB-NETSCAN 1500, Руководство пользователя

Страница: 45 / 256

NetScan User’s Manual ChartView Software Reference 4-7
Units/div - The units in units/div (18) can be °C, °F, °K, °R, mV, or V. The division referenced is one
vertical grid. In the example above for Channel 1, each vertical grid increment represents 10.58°C per
division. Changing the units/division spinner controls (
σ
/
τ
) will result in an automatic adjustment of the
max scale and min scale values (items 13 and 19). Aside from using the units/div triangular controls to
change the value, you can change units/div by placing the mouse cursor in (or tabbing over to) the field
and then either typing in the desired value, or using the PC keyboard arrow control keys.
Status Indicator Region
The status indicator region of the Main Window, located along the bottom of the window, consists of
the following items:
21 Scrolling Time 23 Chart Speed (Time/Div)
22 Status Message Box 24 Status LEDs
1
Scrolling Time - Scrolling Time (21) is turned On or Off from the View pull-down menu. Time Stamp
can be “absolute” (real time) or “relative.” Absolute time is based on your computer clock, whereas
relative time starts at 00:00:00 hours/minutes/seconds, and then continues timing in increments relative
to the Chart Speed (23). The Absolute or Relative time stamp style is selected from the Chart
pull-down file.
Status Message Box - The Status Message Box (22) informs you of the status of the data acquisition
device. Several sample messages appear below:
Sample Status Messages
Attaching to device … Trigger device. Setting acquisition parameters.
Setting channel configuration … Acquisition active. Updating active.
Setting the acquisition parameters. Acquisition active. No updating.
Charting … Waiting for trigger …
Chart Speed - Chart Speed (23) consists of a “time per division” value that can be changed using the
“faster” (rabbit) button or “slower” (turtle) button. Fourteen possible chart speeds are as follows:
0.1 sec/div 1 sec/div 10 sec/div 2 min/div 30 min/div
0.2 sec/div 2 sec/div 30 sec/div 5 min/div 1 hr/div
0.5 sec/div 5 sec/div 1 min/div 10 min/div
Status LEDs
1
- ChartView’s Main Window contains five virtual LEDs (item 24) for conveying the
state of the system. Each of the five indicators is labeled on the main window. These indicators are:
Initializing: Indicates ChartView is configuring the data acquisition instrument.
Charting: Indicates charting is in progress. This indicator is useful when charts are scrolling at a very
slow speed.
Disk: Indicates ChartView is writing to disk.
Buffering in
Instrument:
Indicates the data acquisition instrument is storing scans that are not being saved to disk.
Uploading: Indicates data in the instrument is being uploaded to the PC.
Note 1: The Status LEDs and their labels (listed above) do not appear when using Windows 3.1.
However, when using Windows 3.1, the labels will appear at the time the function is active,
e.g., when uploading, the text “[Uploading]” shows in region 24. This text message is in
addition to the text in the Status Message Box (Item 22).