Omega Engineering OMB-NETSCAN 1500, Руководство пользователя

Страница: 28 / 256

2-10 ChartView Quick Start and Tutorial NetScan User’s Manual
4. Configure Acquisition.
◊
(18) Click on the Acquisition Setup tab (see previous figure). An Acquisition Configuration dialog box appears.
The box can be in either of two modes – (1) Normal, or (2) High-speed, single channel. Note that you
can also access the Acquisition Configuration dialog box from the Setup pull-down menu or the Channel
Configuration button (item 8, below).
1- Group Select
2- Start Charts & Indicators
3- Pause Charts
4- Stop Charts
5- Scroll Faster
6- Scroll Slower
7- Display Configuration
8- Channel Configuration
9- PostView
10- Arm
Acquisition
11- Disarm
12- Print Charts
ChartView Toolbar Reference
The information entered in the Acquisition window is used by the Arm Acquisition command to set up the
acquisition of data to disk. When the trigger is satisfied, the scans are collected at the selected scan
frequency and stored to disk in the designated file.
Acquisition Dialog Box, Normal Mode
◊
(19) Click “Okay” to exit the Acquisition dialog box. Note that we are using the Acquisition default settings, and
the Data Destination default settings in this tutorial (as shown in the above figure).
Note: The following table provides a brief description of various acquisition setup parameters.