Omega Engineering OMB-DBK-34A, Руководство пользователя

Страница: 55 / 250

P3
Pulse/Frequency/High-Speed Digital I/O
This is a general P3 pinout for use with DBK cards. It is not to be confused with the more detailed pinouts
found in the primary “device-specific” manuals. In regard to pinouts for devices not depicted in the following
table refer to the applicable user’s manual.
DaqBook/2000 Series &
DaqBoard/2000 Series Devices
DaqBook/100 Series, /200 Series
DaqBoard/100 Series, /200 Series
LogBook
Pin Signal Type Pin Signal Type Pin Signal Type
1 DGND (Digital Ground) 1 Interrupt Line Input 1 Interrupt Line Input
2 DGND (Digital Ground) 2 Interrupt Line Enable 2 Interrupt Line Enable
High-Speed Low Byte Channels High-Speed Low Byte Channels High-Speed Low Byte Channels
3 Digital 7 Digital I/O Bit 7 3 SDI 7 Digital I/O Bit 7 3 HSD 7 Digital I/O Bit 7
4 Digital 6 Digital I/O Bit 6 4 SDI 6 Digital I/O Bit 6 4 HSD 6 Digital I/O Bit 6
5 Digital 5 Digital I/O Bit 5 5 SDI 5 Digital I/O Bit 5 5 HSD 5 Digital I/O Bit 5
6 Digital 4 Digital I/O Bit 4 6 SDI 4 Digital I/O Bit 4 6 HSD 4 Digital I/O Bit 4
7 Digital 3 Digital I/O Bit 3 7 SDI 3 Digital I/O Bit 3 7 HSD 3 Digital I/O Bit 3
8 Digital 2 Digital I/O Bit 2 8 SDI 2 Digital I/O Bit 2 8 HSD 2 Digital I/O Bit 2
9 Digital 1 Digital I/O Bit 1 9 SDI 1 Digital I/O Bit 1 9 HSD 1 Digital I/O Bit 1
10 Digital 0 Digital I/O Bit 0 10 SDI 0 Digital I/O Bit 0 10 HSD 0 Digital I/O Bit 0
11 DGND (Digital Ground) 11 DGND (Digital Ground) 11 DGND (Digital Ground)
12 Expansion 2 – reserved 12 CTR 5 Gate 9513 chip 12 C/D – Command Data Note 1
13 Expansion 3 – reserved 13 CTR 5 In 9513 chip 13 WR – Write Strobe Note 1
14 Expansion 4 – reserved 14 CTR 4 Gate 9513 chip 14 RD – Read Strobe Note 1
15 Timer 0 Output 15 CTR 4 In 9513 chip 15 TMR 0 Out, Timer 0 Output
16 Timer 1 Output 16 CTR 3 Gate 9513 chip 16 TMR 1 Out, Timer 1 Output
17 Counter 2 Input 17 CTR 3 In 9513 chip 17 CNT 2 In, Counter 2 Input
18 Counter 0 Input 18 CTR 2 Gate 9513 chip 18 CNT 0 In, Counter 0 Input
19 +15 VDC Supply 19 CTR 2 In 9513 chip 19 +15 VDC Supply
20 +5 VDC Supply 20 +5 VDC Supply 20 +5 VDC Supply
21 DAC Pacer Clock Input or Output 21 D in Strobe --
Not Connected
-- 21 --
Not Connected
--
High-Speed High Byte Channels High-Speed High Byte Channels High-Speed High Byte Channels
22 Digital 15 Digital I/O Bit 15 22 SDI 15 Digital I/O Bit 15 22 HSD 15 Digital I/O Bit 15
23 Digital 14 Digital I/O Bit 14 23 SDI 14 Digital I/O Bit 14 23 HSD 14 Digital I/O Bit 14
24 Digital 13 Digital I/O Bit 13 24 SDI 13 Digital I/O Bit 13 24 HSD 13 Digital I/O Bit 13
25 Digital 12 Digital I/O Bit 12 25 SDI 12 Digital I/O Bit 12 25 HSD 12 Digital I/O Bit 12
26 Digital 11 Digital I/O Bit 11 26 SDI 11 Digital I/O Bit 11 26 HSD 11 Digital I/O Bit 11
27 Digital 10 Digital I/O Bit 10 27 SDI 10 Digital I/O Bit 10 27 HSD 10 Digital I/O Bit 10
28 Digital 9 Digital I/O Bit 9 28 SDI 9 Digital I/O Bit 9 28 HSD 9 Digital I/O Bit 9
29 Digital 8 Digital I/O Bit 8 29 SDI 8 Digital I/O Bit 8 29 HSD 8 Digital I/O Bit 8
30 AGND (Analog Ground) 30 OSC (Frequency Out) 9513 chip 30 AGND (Analog Ground)
31 DAC3 Analog Out Note 3 31 CTR 5 Out 9513 chip 31 AOUT 0 / Scan
32 DAC2 Analog Out Note 3 32 CTR 4 Out 9513 chip 32 AOUT1 / Trigger
33 DAC1 Analog Out Note 3 33 CTR 3 Out 9513 chip 33 AOUT2 / Clock
34 DAC0 Analog Out Note 3 34 CTR 2 Out 9513 chip 34 AOUT3 / Digital Out
35 Counter 3 Input 35 CTR 1 Out 9513 chip 35 Counter 3 Input
36 Counter 1 Input 36 CTR 1 In 9513 chip 36 Counter 1 Input
37 -15 VDC Supply 37 CTR 1 Gate 9513 chip 37 -15 VDC Supply
Notes
:
(1) LogBook P3 pin 12, 13, and 14 functions are not user accessible.
(2) For DBK202, DBK203, and DBK204, the 37-pin P3 connector is obtained by connecting a CA-60 cable to an onboard
40-pin header.
(3) Consult your user’s manual in regard to DAC analog output availability for your specific device. For example:
DaqBook/2020 connects to DACs via BNC connectors and DaqBook/2005 has no DACs.
(4) For devices that have 100-pin P4 connectors DBK200 Series adapters can be used to obtain one or more DB37
connectors designated as P1, P2, and P3.
DBK Option Cards and Modules
877095
System Connections & Pinouts 2-5