OPERATION OF THE APPLIANCE
Use the induction cooking zones with suitable cookware.
After mains voltage is applied, all displays are come on for a moment. When this time is over, the
hob is in the
stand-by mode
and it is ready for operation.
The hob is controlled with electronic sensors which are operated by touching the related sensors.
Each sensor activation is followed by a sound signal (
buzzer
).
Switching the appliance on:
Switch the hob on by touching
ON/OFF
key . All heater displays show a static "
0
" and the
bottom right dots blink. (If no cooking-zone is selected within 20 seconds, the hob will automatically
turn off.)
Switching the appliance off:
Switch the hob off at any time by touching .
ON/OFF
key has always priority in the switch off function.
Switching the cooking-zones on:
Touch the
heater selection
key you wish to cook on. There is a static dot indication on the selected
heater display and the blinking dot on all other displays extinguish.
For the selected heater, you can set the heat level by touching the Sliding Buttons
.
The element is now ready to cook on. For quickest boil times, select desired cooking level and
then touch the P key to activate Boost function.
Switching the cooking-zones off:
Select the element you want to switch off by pressing the
heater selection
key.
Using
turn the temperature down to "
0
". (Also using the right
and
left of the slider buttons
simultaneously turns the temperature to "
0
")."
If the cooking zone is hot, "
H
" will be displayed instead of "
0
".
Sliding Buttons
6
