When the timer has run down, a signal sounds and the timer display shows "
00
" statically, the
assigned cooking zone timer LED blinks. The programmed cooking zone will be switched off and the
"
H
" will be displayed if the cooking zone is hot.
The sound signal and the blinking of the timer LED will be stopped automatically after
and/or by operating any key.
Buzzer :
While the hob is in operation, the following activities will be signalled by means of a buzzer:
·
Normal key activation with a short sound signal
·
Continuous operation of keys over a longer period of time (10 seconds) with a longer,
intermittend sound signal.
Boost Function :
A cooking zone has to be selected, cooking level set to „desired cooking level" and P(Boost) key
has to be pressed again.
Boost-Function can be activated if the induction module accepts the setting on this cooking zone If
Boost Function is active a „P" is displayd on the corresponding display.
Activating the booster can exeed the maximum power and the intergated power management will
be
activated .
The neccessary power reduction is shown by blinking of the correpsonding cooking zone display.
Blinking is active for 3 sec. and allows further adaptations of the settings before power reduction.
30 second
10
