omega altise
6
AIR-CONDITIONING WITH INSTALLATION
If required, your appliance can also be installed semi-
permanently (Fig. 5).
Proceed as follows:
Drill in an outside wall or in the window pane a 134mm dia.
hole respecting the heights shown in (Fig. 6).
•
Fit the flange accessory provided in the hole following
the indications in figs. 7, 8 and 9.
•
Fit the hose in the housing at the back of the appliance
(Fig.1).
•
Fit the end of the hose to the flange as shown in (Fig. 6).
When the hose is not fitted, the hole can be closed with
the flange cap.
Keep the air hose as short and free of curves as possible
to avoid bottlenecks.
When installing the air conditioner semi-permanently,
you should leave a door slightly open (as little as 1cm) to
guarantee correct ventilation.
