Omega Altise APC12CVA Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 18

Omega Altise APC12CVA Скачать руководство пользователя страница 16

omega altise

15

CLEANING
Before cleaning or maintenance, turn the appliance off by pressing

the

button on the control panel or ON/OFF button on

remote control, wait for a few minutes then unplug from the mains
socket.

CLEANING THE CABINET
You should clean the appliance with a slightly damp cloth then dry
with a dry cloth.

Never wash the air conditioner with water. It could be dangerous.

Never use petrol, alcohol or solvents to clean the appliance.

Never spray insecticide liquids or similar.

CLEANING AIR FILTERS
To keep your air conditioner working efficiently, you should
clean the filter every week of operation.

The filters are housed in the intake grille (Fig. 25).

Use a vacuum cleaner to remove dust accumulations from
the filter.  If it is very dirty, immerse in warm water and rinse
a number of times.  The water should never be hotter than
40°C. After washing, leave the filter to dry then a ttach the
intake grille to the appliance.

START – END OF SEASON OPERATIONS
START OF SEASON CHECKS

Make sure the power cable and plug are undamaged and
the earth system is efficient.
Follow the installation instructions precisely.

END OF SEASON OPERATIONS
To empty the internal circuit completely of water, remove
the cap (Fig.26).
Run off all water left into a basin.  When all the water has
been drained, put the cap back in place.
Clean the filter and dry thoroughly before putting back.

«
...
14
15
16
17
18
»

Содержание APC12CVA



















Отзывы:

Нет отзывов