omega altise
9
Maximum speed
: for maximum fan power
Medium speed:
reduces noise levels but still maintains a good level of
comfort.
Low speed:
for silent operation
In this mode, AUTO speed cannot be selected.
HEAT MODE – Only on Reverse cycle models
•
Press the MODE button a number of times until the heating
symbol appears.
•
Select the target temperature (13-27°C) by pressing the
or
button until the corresponding value is displayed.
•
In heating mode, the fan speed is selected automatically by the
appliance.
•
Water is removed from the air and collected in the tank.
•
When the tank is full, the appliance shuts down and “
” (full tank) appears on the
display. The tank cap must be extracted and emptied (Fig. 26). Run off all water left
into a basin. When all the water has been drained, put the cap back in place.
•
When the tank has been emptied, the appliance starts up again.
N.B. - When operating in very cold rooms, the appliance defreezes automatically,
momentarily interrupting normal operation. “
” appears on the display. During this
operation, it is normal for the noise made by the appliance to change.
- in this mode, you may have to wait for a few minutes before the appliance starts
giving out hot air.
- in this mode, the fan may operate for short periods, even though the set temperature
has already been reached.
SMART MODE
The appliance chooses automatically whether to operate in air
conditioning, fan or heating (certain models only) mode.
To set this mode:
•
Press the MODE button a number of times until the SMART
symbol appears.
POWERFUL FUNCTION
Ideal for the summer to cool rooms rapidly. Activate by simply
pressing the POWERFUL button. The appliance operates in cool
mode at maximum fan speed. While this function is selected it is
not possible to set the temperature or change fan speed.