OMEGA ALTISE
4. WARM A BIGGER SURFACE AREA (OSC – OSCILLATION)
: Pressing the ‘OSC’ button will allow the heater
to oscillate. The heater can oscillate up to 70
o
. To stop the oscillation, press the ‘OSC’ button once more. (see
figure below)
5. SET THE SLEEP TIMER (TIMER):
The timer function allows you to set the length of operation of your heater
from 0.5 hour to 7.5 hours. Pressing the ‘Timer’ button repeatedly will increase the length of operation by 0.5 hour
each time. The sleep timer can be set in any mode.
6. TURN OFF WHEN NOT IN USE. To turn the heater OFF, press the ‘POWER’ button. The unit will work in the
COOL FAN MODE for 30 seconds then turn off itself.
SAFETY FEATURES
1. A thermal overload protector is built in to prevent overheating.
2. When an overheat temperature is reached, the heater will automatically shut off. It can only resume operation
when the user resets the unit (see reset instructions below).
3. If the unit is tilted, a safety system automatically will cut off the power, put the unit in a vertical position and it
will go on stand-by mode. Turn the unit on by pressing the POWER button and the unit will start operating
again as per normal.
To reset your heater:
1.
Unplug the heater and wait between 5-10 minutes for the unit to cool down.
2.
Then, turn on the unit again and operate normally.
OSCILLATION (OSC) INDICATOR
-
When this symbol is displayed, your unit
is in oscillation mode.
TIMER INDICATOR
-
When this symbol is displayed, it indicates
the length of operation of your unit (sleep
timer only).
