OMEGA ALTISE
GETTING STARTED
1. Carefully remove the heater from the plastic bag and the carton.
2. Place the heater on a stable and flat surface.
3. Set the main power switch to the ’OFF’ position (see diagram on right). Plug the cord set into a 240V~A.C.
electrical outlet. Turn the main POWER switch to the ’ON’ position. A ’beep’ sound and the red LED will come
on indicating that there is power to the unit. The heater is now ready for use. Refer to the function setting
section below for the full operation of your heater. The red LED will remain lit until the main POWER foot Switch
is turned OFF and the heater is unplugged from the electrical outlet.
FUNCTION SETTING
The heater may be operated by the manual controls located on the heater (refer to the MANUAL OPERATION
section) or by your remote control (refer to the REMOTE CONTROL OPERATION section).
MANUAL OPERATION
1.
TURN THE UNIT ON (POWER)
: Turn the heater ON by pressing the ‘POWER’ button; the LED of the unit will
display the current ROOM temperature (appears as bright red). Upon turning the heater on, the unit will be in
the default HIGH HEAT MODE.
ON Position
OFF Position
