BF - Installation and operating manual
6
The information on the product label must be observed. Non-observance of the data given
there is regarded as improper use.
The manufacturer will under no circumstances be responsible for any damage resulting from
improper, incorrect or unreasonable use.
The pressure vessel has been designed for a primarily static pressure. So, if you have a rapid
changes in pressure, must be use special fittings by installation to avoid dynamic pressure.
Warranty exclusion / Improper use
Any use apart from the intended use mentioned above is considered to be not intended. The
manufacturer/supplier can assume no liability for damage resulting from this type of usage,
the user alone bears the risk of this.
The guarantee shall be void if:
•
The operating instructions were not followed with respect to initial commissioning
and maintenance.
•
The unit was not operated properly and appropriately.
•
The unit was operated when it was clearly defective.
•
If unauthorized or unqualified persons work with or on the filter.
•
When operating without safety equipment or with incorrect or non-functional safety
equipment.
•
Non-original spare parts or replacement parts were used.
•
The unit was not operated within the permissible technical parameters.
•
Unauthorized constructional changes were made to the unit or if parts of the unit
that may not be opened were dismantled.
•
The filter and filter elements did not be store indoors and in a dry place.
•
If part of the filter was removed, when the filter was still pressurized!
Depressurize the filter before carrying out any work on the filter.
•
The O-ring was damaged during the filter elements replacement and was not
replaced.
Storage information
The following storage must be considered for proper operation:
•
The filter and filter elements must be stored indoors in a dry place.
•
Store them in original packing until they are used.
Installation
Operations should be performed only by qualified personnel. Never work on with
installation under pressure. The user is responsible for ensuring that the filter never
operates at a pressure and temperature exceeding the nominal values.
