OMEGA AIR AOK 50B, Инструкция по установке и эксплуатации

Страница: 4 / 16

4
Technical data
*AOK 50SS
CALCULATION OF CAPACITY
For rough calculation of discharge capacity at certain pressure use following equation:
𝑄 = 20,5√∆𝑝
Example: if operating at 35barg;
𝑄 = 20,5√35 = 121,2
l/h
MATERIALS
AOK 50B AOK 50SS
Housing material Anodized aluminum Stainless steel 1.4404
Screws, Other components Stainless steel 1.4404, A4
Floater Polyamide (PA6)
Sealing NBR, FPM
Operation pressure range 8 – 50 bar / 116 – 725 psi
Minimum recommended operating
pressure
12 bar(g) 145 psi
Drain capacity (7 bar / 101 psi)
167 l/h
0,1 scfm
Drain capacity (16 bar / 235 psi)
252 l/h
0,15 scfm
Gas consumption for one fluid outlet at
50 bar(g)
0,8 Ndm
3
Operating temperature range
1,5 – 65°C
35 - 149 °F
Operating media Condensate (air, water, oil); Non-aggressive
Inlet connection G ½” (NPT on request)
Outlet connection G ½” (NPT on request)
Reservoir volume 0,45 l
Mass 2,8 kg / 7,2 kg*
Dimensions A x B x C [mm] 155 x 100 x 100
Valve type Servo, Normally open
Discharge orifice cross section 1,8mm 1,8mm