15. Use and maintenance manual
B01.26 - B02.40 - B02.10
San Maurizio C.se - 01/09/2021
www.omcr.it
5. MAINTENANCE
5.1
Once every 6 month check the lifting brackets and pins for visible damage or oxidation. In case of damage
or oxidation restore or replace the lifting brackets or pins.
5.2
Once every 12 month check the lifting brackets and pins for any noticeable permanent deformation or
damage (see
Pic.10
); it is sufficient to verify that the pin rotate freely on its axis inside the bracket.
5.3
In case of unexpected failure of lifting ropes/chains with a consequent overload on the lifting pins, check
their cilindricity (see
Pic.10
) to notice potential deformations; in case of deformation over 0,3 mm replace the
pins; replace the mounting screws and check the correct torque to tighten the screw according to the values
mentioned within this manual.
5.4
In case of accidental impacts on the lifting elements during the lifting, handling and overturning operations,
check the cilindricity of the pins (see
Pic.10
); in case of deformation over 0,3 mm replace the pins; check
eventual deformations on the lifting brackets and, if noticed, replace them; replace the fixing screws and check
the correct clamping couple of the screws according to values indicated on the table.
Pic.10