12. Use and maintenance manual
B01.26 - B02.40 - B02.10
San Maurizio C.se - 01/09/2021
www.omcr.it
Before each lifting, handling or turnover make sure that the load capacity of the lifting brackets
is capable of and according to the weight of the die. The maximum load/lifting capacity, the
work number, the part number, the brand label and the EC label are indelible marked on the
lifting brackets. (see
Pic.7
).
NOTE:
the work order numbers of lifting brackets and pins are not necessarily corresponding
WARNING
Pic.7
MAXIMUM CAPACITY LOAD
CONSTRUCTOR
EC MARK
PRODUCT CODE
LIFTING PIN MARK
WORK ORDER NUMBER
3.6.2 - MARKING BRACKETS “B01.26......-02“
In case of a lifting or moving application, the load capacity of the lifting bracket has to be at least half of the
entire die weight. (upper half-die + lower half-die).
For example: die weight 28.000 kg - minimum lifting bracket capacity load: 28.000 / 2 = 14.000 kg
When lifting and overturning a half-die, the minimum load capacity of the bracket must be at least
1/2
of the
weight of the half-die.
For example: half-die weight 16.000 kg - minimum load-bearing capacity of bracket: 16.000/2 = 8.000 kg
3.6.3 - EXAMPLE OF BRACKETS PROPORTIONING
