7
ENGLISH
ENG
3. GENERAL SAFETY REGULATIONS
!
WARNING:
It is compulsory to comply with the general safety and prevention regulations listed below:
persons not complying with the requirements in this manual may harm themselves and/or harm or damage
persons, animals or things.
THE MACHINE MAY ONLY BE USED:
• The machine may only be used by responsible staff in
good health who have been specially trained to use
the equipment and are acquainted with all the risks.
• The equipment can only be used by operators
and users who have fully read and understood the
instructions and information in the booklet.
• The machine may only be used inside closed rooms
that are free from atmospheric agents: snow, rain and
wind, etc.
• The equipment, including the traverse, can only be
used by one operator at a time; it is forbidden for
more than one person to use the equipment at the
same time.
IT IS COMPULSORY:
• It is compulsory to check that the floor where the
hydraulic equipment operates is free of objects, is
clean, horizontal, level and able to support the load of
the equipment weight and the element loaded on the
equipment. The part of the floor where you intend to
operate the equipment must be free of slits, openings
or drains where the wheels of the equipment could
get stuck or caught.
Fig. 3
• It is compulsory, after lifting the vehicle by means of
the jack, lay the mentioned vehicle on the special
stationary stands (not supplied) before starting
working under the same.
Fig. 4
• Before operating with the equipment, it is compulsory
to check that the operating area is sufficiently
illuminated (sufficiently illuminated area but not
subject to glare or intense light).
• It is compulsory, before operating the equipment,
to make sure it is completely intact and functions
perfectly; on the contrary, it is forbidden to use the
equipment.
• It is compulsory to check that the installed safety
devices are in perfect working order before operating
the equipment: it is forbidden to operate the machine
if it is faulty.
• It is compulsory to check that there are no hazardous
conditions for persons at risk during operation. If
there are, stop any operations underway immediately
and keep people away.
• It is mandatory, to fold the arm after use (arm
completely down). Put it away in clean, safe and
secure area in order to prevent any damage and non-
authorized use.
• In the event of irregular or anomalous sounds, it is
compulsory to stop all operations immediately and
find the cause of the anomaly. If in doubt, avoid any
improper operations and contact the manufacturer’s
technical service centre.
• Before lifting any vehicle, make sure that the wheels
are blocked in such a way that they cannot turn nor
move and the hand brake is on.
• It is compulsory to check that there are no obstacles
in the load support area during operational
movements.
• The device must be placed at 90° respect to the
vehicle to be lifted.
Fig. 5
• Before use, the device must be placed under the
lifting points foreseen by the vehicle’s manufacturer.
First make sure they are not dirty, greasy nor rusty.
• When it goes up and down, make sure the vehicle is
perfectly steady on the plate.
• Make sure that the plate is always in perfect
adherence with the load.
• It is compulsory to constantly observe the equipment
route during moving operations without a load.
OMCN S
.p.A.
DOCUMENT
GENERIQUE DE DIVULGA
TION: DEMANDEZ LE LIVRET
CORRESPONDANT
SPECIFIQUEMENT
A
L
’AR
TICLE EN VOTRE POSSESSION. DAS IST
EIN
DEMONSTRA
TIVGESAMTDOKUMENT
. BITTE FRAGEN SIE FÜR DIE ENTSPRECHENDE BEDIENUNGSANLEITUNG DES
AR
TIKELS IN IHREM BESITZ.
OMCN S
.p.A.
OMCN S
.p.A.
DOCUMENT
O DIMOSTRA
TIVO GENERALE: RICHIEDERE IL
MANUALE CORRISPONDENTE
ALL
’AR
TICOLO IN VOSTRO POSSESSO. GENERAL
DOCUMENT
AS
A
DEMONSTRA
TION : REQUEST
THE MANUAL
SPECIFICALL
Y ISSUED WITH
THE
AR
TICLE IN
YOUR OWNERSHIP
.
DOCUMENT
O DIMOSTRA
TIVO GENERALE: RICHIEDERE IL
MANUALE CORRISPONDENTE
ALL
’AR
TICOLO IN VOSTRO POSSESSO. GENERAL
DOCUMENT
AS
A
DEMONSTRA
TION : REQUEST
THE MANUAL
SPECIFICALL
Y ISSUED WITH
THE
AR
TICLE IN
YOUR OWNERSHIP
.