9
Maintenance
In order to ensure best performance and long-lasting reliable working item, please follow the simple
maintenance and cleaning operation as follows:
•
Make sure the power cord is unplugged before cleaning the back of your cabinet or before moving it.
•
Clean the inside of your cabinet thoroughly once a year after unplugging and unloading it. Use water and a
mild cleaning item then rinse carefully.
•
To assure that your wine cooler provides a long-lasting reliable performance, you should check it regularly
and inform your dealer if anything unusual is found.
Troubleshooting
PROBLEM
SOLUTION
Not Working
Check if it is plugged in or not
Fuse break
No power
Cooling problem
Heat source near the item
Ventilation not well
Door is not close well or the door is open for so long
There is a door sealing problem or deformation
Bottles are loading too much in same shelf
The air inlet or outlet is blocked
Control setting problem
Ventilation space in the right and left casing is not enough
Noisy
Wine cabinet place is not flat
Item is touching the wall
Some parts are loose or taken off
Ensure bottle and shelf safety
•
Spread your bottles out as evenly as possible over the shelves, so weight is not concentrated in one point;
and make sure your bottles will not touch the back of the cabinet.
•
Make sure bottles are not grouped together at the top or bottom of the cabinet.
• Following loading instructions provided, according to the type of storage fixtures with which your cabinet is
equipped and never stack bottles on a sliding shelf.
• Due to humidity which will be fluctuated based on room humidity and temperature, please make special film
to pack before storage inside cabinet, which will ensure the label of bottle could not be damage.
Operation
If problem still occurs after checking above, please try to contact service provider or dealer.
