Omcan VP-NL-0040-MS, Инструкция по эксплуатации

Страница: 10 / 28

10
Operation
Adjust program values and turn functions ON/OFF
1. Forward or back; adjusted values are saved right away.
2. Increases or decreases function values.
3. Turns functions ON/OFF; specific functions, like soft-air, clean cut seal, etc., are turned
either on or off.
4. If the function is turned on, the value may be adjusted by pressing the and buttons.
5. Resets the original value.
6. Saves changes and returns to the Home menu.
Multi-Functional button: Performs various functions, depending on the active menu
Home menu:
• No effect while in the PA program.
• For programs P1-9, displays the entered values.
Settings menu:
• For specific functions, like soft-air, clean cut seal etc., the button is used to turn the
function ON/OFF.
Programs 1 through 9
• Each program may be customized by turning certain functions on or off and by adjusting
the function values.
PA - Automatic
• Program with factory settings for vacuum and sealing functions, which is activated when
turning on the machine for the first time.
P H2O – Program
• To be used when packing liquids or semi-liquids, like sauces and soups.
• Program jumps to the sealing function as soon as product boiling is detected; this
prevents product loss through spillage and evaporation.
When turning off the machine with the button, the symbol will start blinking on
the LCD display
• The pump will stop after about 4 seconds.
• Press the button for a second time and the pump will stop immediately.
• Close the lid; the machine will initiate the cool-down phase and perform a number of
vacuum cycles before turning off automatically.
• These additional cycles allow any moisture in the oil of the pump to evaporate. This
increases the longevity of the machine and minimizes the need for oil changes and
pump maintenance.