7
Troubleshooting
Maintenance
CHANGING BLADES
TO REMOVE THE BLADES
1. Remove the top cover and the guide.
2. Remove the exit chute.
3. Remove the support angle on each side of the chute (10mm key).
4. Unscrew bolt.
5. Unscrew the bottom bolt on the blade frame.
6. Turn the frame cam wheel with the v belt.
7. Use the special tool to remove the blades one by one.
Tool sold separately, Item number 78617.
TO INSTALL THE NEW BLADES
1. Use the special tool to install the blades one by one.
2. Install the blade frame tighten the bottom bolt and make sure the frames are aligned.
3. Install the angle support on each side of the chute (10mm key).
4. Install the exit chute.
5. Install the top cover and the guide.
Always cut off the main power before replacing any parts.
Problems
Solutions
The slicer does not turn on when
powered.
Check if the electric cord is connected.
Check the breaker of the building.
Check the breaker on the side of the slicer.
If the slicer is still not working, call a technician or us.
The slicer does not slice properly.
Make sure the bread is not hot.
Check if the blade is clean.
Check the guide adjustment.
If the slicer still does not slice properly, change the blade.
