Omcan Santos 54, Инструкция по эксплуатации

Страница: 9 / 20

9
Troubleshooting
FAULT FINDING
Identifying the cause of appliance stoppage precisely.
THE APPLIANCE DOES NOT START
CHECK:
• The main supply, the condition of the supply cord (9).
• The cup (1) or (2) is fitted properly on the cup stand (8). Check in particular that the top part of the cup is
not damaged.
• The cleanness of the cup (1) or (2) positioning area.
THE APPLIANCE STOPS SUDDENLY AFTER OPERATING FOR A LONG TIME: THE MOTOR IS VERY
HOT
The motor is protected by an integral thermal protection. In the event of overheating, the motor stops
automatically.
• Switch off the appliance (unplug the power supply cord (9)).
• Wait for the motor to cool down (20 to 45 minutes).
• Plug back in and resume work by placing the cup (1) or (2) on the cup stand (8).
THE MACHINE STOPS BECAUSE OF AN OVERLOAD:
If the motor is jammed (foreign body, object or hard foodstuffs blocking the mixing head), the appliance stops
automatically.
• Switch off the appliance (unplug the power supply cord (9)).
• Take the stainless steel (1) or plastic cup (2) off the cup stand (8) and place it on a worktop.
• Remove the objects or hard bits blocking the mixing head.
• Reset the thermal protection device (10) underneath the appliance manually (Fig. F).
• Put the products or foodstuffs to be processed back in the cup.
• Plug back in and resume work by placing the cup (1) or (2) on the cup stand (8).
Maintenance
CHANGING THE MIXING HEADS AND DEFLECTOR
TAKING DOWN THE MIXING HEAD (3) OR (4) AND DEFLECTOR (5)(FIG. A, FIG. B AND FIG. C):
• Unscrew the mixing head (3) or (4) by hand holding the deflector (5) to stop the motor shaft (6) from
turning.
MOUNTING THE DEFLECTOR (5) AND MIXING HEAD (3) OR (4)(FIG. A, FIG. B AND FIG. C):
• Put back the deflector (5) making the two flat surfaces register with the two flat surfaces of the motor shaft
(6). Screw on the mixing head (3) or (4) by hand.