Omcan Santos 54, Инструкция по эксплуатации

Страница: 7 / 20

7
Technical Specifications
Operation
Model Santos 54
Power 250 W
Variable Speed 8,000 - 16,000 RPM
Electrical 120V / 60Hz / 1Ph
Dimensions 7.5” x 7.5” x 20” / 191 x 191 x 508mm
Packaging Dimensions 8.5” x 9.6” x 23.5” / 216 x 244 x 597mm
Weight 12.7 lbs. / 5.7 kgs.
Packaging Weight 14 lbs. / 6.3 kgs.
Item Number 44634
START-UP
1. Plug in the appliance.
2. Turn the motor speed knob (7) anti-clockwise to the low speed position (small mark on the knob in front of
the operator).
3. Put a small amount of liquid (approximately 0.25 liter) into the bottom of the stainless steel (1) or plastic cup
(2).
4. Place the stainless steel (1) or plastic cup (2) on the cup stand (8) (operating position) (Fig. A) and the
appliance starts up immediately at low speed.
5. Turn the motor speed knob (7) clockwise to high speed (big mark on the knob in front of the operator).
6. Go back to low speed by turning the motor speed knob (7) anti-clockwise to the low speed position (small
mark on the knob in front of the operator).
- You have now tested the whole speed range.
7. Take the cup off the cup stand and the appliance will stop.
8. Repeat operations 4, 5, 6, and 7 with the second cup, if required.
TAKE NOTE:
1. For the first few operations, you are advised to start at low speed to prevent splashing (cup too full).
2. You are not advised to operate the appliance with no liquid inside the cup.
IDLE POSITION
Placing the cup (1) or (2) in the second position (lower position) on the cup stand (8) puts it into the idle or stop
position (Fig. E).
NOTE:
Emulsions or mixes are usually obtained in under 1 minute.