8
Maintenance
ATTENTION
The motor mounted on the MM-IT-0030 and MM-IT-0050 is equipped with a thermic micro disjunctor, to avoid
overheating due to improper use of the machine. We remember that, to make a good mixture, the maximum
kneading time is 10 minutes. If the machine is in operation for 30 continuous minutes, the safety switch will turn
off the mixer.
The micro-disjunctor switching on doesn’t stop the machine completely; it causes the machine working
exclusively by impulse controls, to enable the end of the kneading work.
In case of stopping during the work, act as follows:
1. Keep pressing the “AVANTI” button until you reach the desired mixture.
2. Push the “STOP” red button.
3. Unload the tank.
4. Unplug from the socket.
5. Wait for the motor to cool.
6. Switch on again.
ACCIDENTAL STOPPING
If the machine stops accidentally during the processing operation, before investigating the reasons for this
failure, it is necessary to stop at once the supply of electric current to the motor by pushing down the red button
STOP. Then the electric flex should be disconnected from the socket.
After that:
• If the stop is caused by lack of electric current supply due to a failure in the electricity network, do not
reconnect the machine to the socket until normal conditions have been restored in the network.
• In case the inconvenience is due to reasons connected with the power unit, contact the dealer to arrange
for the machine to be checked, if necessary, by the manufacturer.
• If the stop is caused by the thermic micro-disjunctor switching on (due to a motor overheating), wait for the
motor cooling and then switch on again the machine.
REFERENCE
Item Number Model Number
Description
Manufacturer Model Number
37459
MM-IT-0030
Meat Mixer 66 lb / 30 kg
1 HP / 746 W 110V/60/1
MX30
13159
MM-IT-0050
Meat Mixer 110 lb / 50 kg
1.5 HP / 1119 W 220V/60/1
MX50
