![background image](http://html1.mh-extra.com/html/omcan/lar-25pmb/lar-25pmb_instruction-manual_3910358003.webp)
1. Introduction
1.1 Safety
The High Performance Tilting Blenders are machines simple to use and to
clean. However for your safety read the following instructions in order to avoid
accidents:
1.1.1 Always unplug the machine when cleaning, servicing or when any other
operation is needed.
1.1.2 Never use tools that do not belong to the machine during operation.
1.1.3 Never throw water directly to the machine.
1.1.4 Do not operate the machine wearing wet clothes or wet shoes.
1.1.5 Before operating the machine be sure it is grounded properly.
1.1.6 When washing inside the Cup Nº02 (Pic. 01) be careful with the
blade as it has sharp edges.
1.1.7 DO NOT wear loose fitting clothes while operating the unit.
1.1.8 DO NOT use bracelets or any other piece of jewerly.
1.1.9 Have your hair ALWAYS shortened and held up (use hair fishnets if
necessary) in a way it cannot reach any part of the machine. Roll up any loose
sleeves.
1.1.10 SKYMSEN IS NOT responsible for ANY harm or injury caused by the
negligent or inappropriate use of this equipment by any operator.
1.1.11 This equipment MUST BE operated only by persons whose age equals
or exceeds 18 years old, in a safe and sound state of mind, free from the
influence of any kind of drugs and alcohol, that received proper training
and instructions regarding the correct operation of this machine, that are
wearing correct and authorized safety clothes.
1.1.12 All and any kind of modifications carried on and applied to this machine
IMMEDIATELY NULLIFIES ANY KIND OF WARRANTY and may result in harm
and injuries to the individuals operating this machine and to individuals that are
located in the machine surrounding areas while it is being operated.
1.1.13 UNDER NO CIRCUNSTANCES place your hands in the moving
parts of the machine while it is being used. MAKE SURE the machine has come to a
complete stop before acessing the processed ingredients.
1.1.14 For your safety, the temperature of the processed products shall not
exceed 40 °C.
02
1.2
Main Components
All components are made with carefully selected materials, in
accordance with Siemsen experience and standard testing procedures.