4
IMPORTANT SAFEGUARDS
How to Connect Electricity
For personal safety, this appliance must be properly grounded.
•
A standard electrical supply, properly grounded in accordance with the National Electrical Code and Local
codes and ordinances is required.
• Please make sure that the unit is properly grounded by a qualified technician.
• Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly
grounded.
•
Do not kink or pinch the power supply cord.
•
It is recommended that a separate circuit, serving only your ice maker, be provided.
•
Use receptacles that cannot be turned off by a switch or pull chain.
•
Do not connect or disconnect the electric plug when your hands are wet.
•
Unplug the ice maker or disconnect power before cleaning or servicing. Failure to do so can result in
electrical shock or death.
• Never unplug your ice maker by pulling on the power cord. Always grip plug firmly and pull straight out from
the outlet.
•
Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use
a cord that shows cracks or abrasion damage along its length or at either end.
•
When moving the ice maker away from the wall, be careful not to roll over damage the power cord.
Proper Disposal of the Ice maker
•
Choose a well-ventilation area with temperatures above 50°F and below 90°F. This unit must be installed in
an area protected from the elements, such as wind, rain, water spray or drips.
•
To ensure proper ventilation for your ice maker, the front of the unit must be completely unobstructed.
•
The machine should not be located next to ovens, grills or other sources of high heat.
•
It is important for the ice maker to be leveled in order to work properly. You may need to make several
adjustments to level it.
•
Never allow children to operate, play with or crawl inside the ice maker.
Safety & Warranty
General Information
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Содержание IC-CN-0016
Страница 21: ...21 Parts Breakdown Model IC CN 0016 37865...
Страница 23: ...23 Electrical Schematics Model IC CN 0016 37865...
