![background image](http://html1.mh-extra.com/html/omcan/gr-cn-0559/gr-cn-0559_instruction-manual_4112513009.webp)
9
Installation and Operation
TRANSPORTATION, HANDLING AND STORING
All transportation and handling operations must be performed by informed and trained personnel and must
have read and understood the safety instructions shown in this manual.
1. Perform the machine handling and transportation always when it is off;
2. Verify that lifting means are use, it is able to support the loading weight and overall
dimensions in safety conditions and that are approved and subjected to a regular
maintenance,
3. Adopt all necessary measures to assure the maximum stability in relation to their mass,
4. Avoid making the machine suffer shaking or accidental collisions during the moving and
the loading,
5. Perform the handling with continual movements, without pulls or repeated impulses.
PACKING REMOVAL – OPENING MODALITY
PACKING DESCRIPTION – HOW TO GET RID OF THE PACKING MATERIAL
The machines are package so that the liquids inside and organic matters are not present. There is a
polyethylene cover around the machine which is then inserted in a cardboard box of adequate size. The empty
spaces within the box are occupied with fill material.
Do not waste the packaging, but store it for possible transportation or locate a recycling agency for disposal.
It is an employer’s obligation to be acquainted of the laws in its own country and observe these legislations. It
is forbidden and liable to fines to leave the machine and electric equipment in the environment.
PREPARATION PRELIMINARY OPERATIONS
STABILITY
The machine stability is designed so that in normal functioning conditions, taking into account the climatic
conditions, the machine can be used without reversal risk, fall or inopportune movement. Taking into account
the conformation and the position of the machine, it will function without fastening it to the working ground.
GRATER ROLL ROTATION
The operations indicated must be performed by the maintenance person (skilled personnel
in the electric maintenance field of industrial machinery). For machines fed with three phase
voltage (3 PE AC 400V 50Hz), slacken lightly the blockage wheel to not have a strong pressure
on the drilled plate for the cutting knife. When turning on, verify the Archimedean screw / grater
roll rotates counterclockwise. If there is clockwise rotation, switch off the machine, disconnect
the plug, disassemble it, disconnects the two phase conductions and invert their position.
Содержание GR-CN-0559
Страница 16: ...16 Model GR CN 0559 23991 Parts Breakdown...
Страница 18: ...18 Model GR CN 0559 23991 Electrical Schematics...