Omcan FP-CN-0010, Инструкция по эксплуатации

Страница: 8 / 16

8
Maintenance
from the power.
GENERAL
1. Disconnect the power and pull out the plug before cleaning machine. Rotate the octagonal knob out anti-
clockwise, take off the scraper from the right side. Rotate the basin clockwise and take it out.
2. The machine must be cleaned after work every day, every part that comes into contact with the food must
be cleaned and reassembled.
3. Don’t use water detergents, industrial cleaners, iron brush, hoses, or submerge the machine in water or
any other liquid. Only use mild detergents and wet cloths to clean that parts that come into contact with
food.
MACHINE MAINTENANCE AND DAILY INSPECTION
Note: Please unplug the power before servicing the machine, make sure the machine is completely
disconnected from the power.
REGULAR MAINTENANCE
1. Regularly maintain the cutting mixer machine to effectively extend the service life.
2. Periodically clean the cutting mixer machine to ensure food quality and safety.
DAILY INSPECTION OF KEY COMPONENTS
1. Cutting blade.
Check the cutting blade whether firmly installed, if there is any damage, and before starting the machine.
2. Belt.
The belt should be regularly adjusted, after 2-3 years belts should be replaced, it is necessary to contact
Omcan for parts and service.
3. Cable.
Regularly check the cable, replace if necessary, please contact Omcan.