Omcan FP-CN-0010, Инструкция по эксплуатации

Страница: 5 / 16

5
Safety and Warranty
Material safety
The machine parts which contact with food directly are made of material strictly in accordance with the
requests of food safety and health standards, which does not rust, corrode, is non-toxic and harmless to
human health even after using for a long time.
WORKING PRINCIPLE
When the machine is working, close the basin cover, and put different kinds of roots, stems, leaves, vegetable,
meat and so on into the basin, the food rotates anti-clockwise with the basin, which will be cut into paste when
coming across with vertically rotating blades (size of the paste is to be controlled by adjusting the cutting time).
ELECTRICAL
The machine is equipped with an input cable with cross section 3X1.0 mm2, length 1.85m. The machine
should be connected to power source as 110V / 60Hz.
Attention: socket must be equipped with switch, to make sure power can be cut off on time.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!