
13
Installation and Operation
Maintenance
e. Activate the machine using the control device, turn to “1”.
f. Introduce manually the food product within the grater mouth and drive it towards the grater roll by
lowering the pressure roll.
g. At the end of the food product introduction, or when there is no room left in the basin, stop the machine
using the control device, turn to “0”.
It is recommended to not use the machine without food product.
SWITCHING OFF
Switching off the machine is completed as follows:
1.
Before switching off, wait until all food has exited the machine.
2.
Stop the machine by using the control device and switching it to “0”.
3. Disconnect the machine plug from the feeding socket.
4.
Perform the cleaning interventions.
UNBLOCK IN CASE OF OBSTACLE
During the normal function of the machine, introduction of hard and dry products could block the machine. The
same result can occur if the electric feeding is broken. To be able to resume normal function, the blocked food
product must be removed manually or the power cable is restored.
MAINTENANCE PERSONNEL REQUIREMENTS
The term “maintenance” is not only periodic checks but also the analysis of all problems that put the machine
out of service. It is essential that for the maintenance, cleaning, parts change and breaks research, these
actions are to be entrusted to a skilled personnel authorized by the employer. All operations of maintenance,
cleaning and parts change, must be performed with the machine completely stopped and free of external
feeding sources.
MAINTENANCE PRESCRIPTIONS
PROTECTIONS REMOVAL AND/OR PROTECTION DEVICES
For any interventions described in present chapter, it is necessary to remove the fixed protections. The removal
can only happen by a trained maintenance personnel. At the end of the intervention, these protections must
be replaced to their original position and fastened correctly. The maintenance must disconnect the machine
completely before proceeding with the removal of the fixed protection.
BREAKS OR DAMAGES RESEARCH AND MOVING ELEMENTS UNBLOCKING
Содержание FGM
